0.5″ SMR Type 5 .5000″ Offset, 1/16″ through 5/16″ Shank

Function
Adapter is used for measuring hole locations with a 0.5 retro reflector target.

Features
Features a recess to increase acceptance angle, two .135″ diameter holes to facilitate removal, and powerful neodymium magnets. Provisions for ATT’s 0.5 SMR Retainer/Retention Clips, Type 1, Type 2 or Type 3 (ATT Part Numbers 0.5-RC-1, 0.5-RC-2 or 0.5-RC-3). 6-32″ threaded hole on the bottom of the target for permanent & semi-permanent installation.

Material
Adapter is made of Stainless Steel and heat-treated for corrosion resistance and durability.

Dimensions
Adapter is 0.480″ in diameter. Shank is 0.450″ long unless noted below.

Distance to Center of SMR
Offset is 0.5000″.

OffsetShank DiameterPart Number
0.5000 .0625 0.5-SOSA-5-5000-0625
0.5000 .1250 0.5-SOSA-5-5000-1250
0.5000 .1875 0.5-SOSA-5-5000-1875
0.5000 .2500 0.5-SOSA-5-5000-2500
0.5000 .3125 0.5-SOSA-5-5000-3125

NOTE: 0.625 through .1875 shank sizes have .250 shank length and do not have 6-32 threaded hole.