Skip to content

AS9100D Key Supplier
Terms & Conditions

As a supplier to ATT Metrology Solutions (ATT), it is understood that your organization agrees to meet the following stipulations/ AS9100 requirements whenever ATT’s Purchase order specifies that the order is for an Aerospace application/job (or similar aerospace/AS9100 reference). These requirements are, therefore, to be considered as Terms and Conditions to all aerospace/defense purchases.

Our organization reserves the right to final approval of products, services, methods, processes, equipment and release of products and services.

All special processes must be performed by competent persons.

Communications should be handled through the buyer listed on the Purchase Order.

Our organization reserves the right to control and monitor quality and delivery performance. Failure of a supplier to implement effective corrective actions can result in additional controls over the supplied product or the supplier, including, but not limited to; chargebacks, or additional inventory levels. If these controls are not effective, it can result in the supplier becoming unapproved.

Our organization, or our customers reserve the right to perform verification or validation activities at the supplier's facilities.

Our organization reserves the right to approve or specify any design and development control, special requirements, critical items, or key characteristics.

Our organization reserves the right to designate requirements for test, inspection, and verification (including production process verification), including the use of statistical techniques for product acceptance and related instructions for acceptance by the organization.

Supplier is required to:

  1.  Implement a quality management system.
  2. Use customer-approved external providers, including special process sources.
  3. Notify ATT of non-conforming processes, products or services and obtain approval for their disposition.
  4. Have a program to prevent the use of counterfeit parts as appropriate to the organization and product.
  5. Notify ATT of any changes to processes, products, or services, including changes of external providers or location of manufacture and if necessary, obtain ATT approval.
  6. Flow down to external providers any applicable requirements including customer requirements.
  7. Provide test specimens for design and development approval, inspection/verification, investigation, or auditing.
  8. Supplier shall maintain on file, all quality documentation for a minimum of 10 (ten) years or as required by contract. Calibration records must be retained for 10 (ten) years from completion of purchase order. Contact ATT prior to disposition of quality records for disposition instructions.
  9.  Ensure that persons are aware of their contribution to product and service conformity and product safety.
  10. Ensure that persons are aware of the importance of ethical behavior.

Our organization reserves the right of access by our representative, our customers, and any regulatory authorities to the applicable areas of all facilities, at any level of the supply chain involved in the order and to applicable documentation.

Customer agrees, commencing immediately upon delivery of a Purchase order and continuing until a date that is eighteen (18) months after the date of final completion of work,  that it will not, directly or indirectly, employ or solicit for employment any person employed by or under contract to ATT Metrology Solutions, or any person who has been employed by or under contract with ATT Metrology Solutions within the last eighteen (18) months that has provided services to Customer or to which Customer has had contact, without ATT Metrology Solutions’ prior written consent.  In the event Customer/Client hires any person employed by or under contract to ATT Metrology Solutions, Customer/Client shall pay ATT Metrology a conversion fee in the amount of 25% of the employee’s annualized compensation with ATT Metrology.

ATT suppliers are a critical part of our success. To supply top-quality products and services responsibly, we understand and expect our suppliers will have an internal code of ethics and business conduct, best practices for enhancing product safety, and will maintain compliance with all laws and regulations applicable to your operation of business.
If you have any questions regarding these specifications and requirements, assistance is available. Contact ATT before proceeding with this order.

ATT Metrology Website Terms & Conditions

ATT Metrology, or its affiliates maintains and provides access to this website (‘Website, www.attinc.com’) subject to the following terms of use, together with any other policies posted on our website and incorporate herein by reference. This constitutes a legal agreement between you and ATT Metrology. By accessing or use of this Website, you acknowledge that you have read and accept these terms of use. If you do not accept the terms of use, or do not wish to read and review them, you may not access, sign-up, or use any part of this website or the services offered.

WEBSITE LICENSE & LIMITATION OF LIABILITY

Subject to the agreement of the terms of use, ATT Metrology grants a limited, non-exclusive right and license to access the Website and its content for your own personal, private, non-commercial use. You are solely responsible for access and use of the Website. The Website and any of its content may not be reproduced, duplicated, copied, sold, resold, visited and otherwise exploited for any commercial purpose. If you wish to do so, contact ATT Metrology for the express written consent to hold such authorization. Any unauthorized use of the Website shall immediately terminate the license without prior notice. The Website is provide on an ‘as is’ and ‘as available’ basis only. ATT Metrology makes no representations or warranties of any kind, express or implied, as to the operations of the Website or its Content. ATT Metrology makes no representations or warranties as to the accuracy of the website – as it is using reasonable effort to include the most accurate and up to date information possible – and assumes to liability or responsibility for any errors or omissions that might occur within the content. Furthermore, ATT Metrology shall not be liable for any indirect, incidental, consequential, or punitive damages that may arise from such errors or for lost revenues or profits. You agree to indemnify, defend and hold harmless ATT Metrology and all of its officers, directors, shareholders, employees, agents and other representatives from and against any and all liability, loss or cost (including attorneys’ fees) arising out of, or related to your access to and use of the Website and any breach by you of these terms of use.

Ownership & Content

The Website and all of its elements – including photography, text, graphics, and any type of script, HTML, mark-up or style sheets are owned and copyrighted by ATT Metrology and permission of use needs to be obtained in order for any type of use outside of the realm of this Website. ATT Metrology and trademarks may not be used without ATT Metrology express written consent and may not be used in a manner that is likely to cause confusion to customers or discredit ATT Metrology.

Unless otherwise agreed by ATT Metrology in writing, any communication or material you transmit to ATT Metrology, including any data, questions, comments, notes, suggestions, or the like are, and will be treated as, non-confidential, non-proprietary and unprotected information. Anything you transmit to ATT Metrology shall be deemed to have been assigned to ATT Metrology, shall remain the exclusive property of ATT Metrology and may be used anywhere and in any medium, without compensation to you, by ATT Metrology or its affiliates, for any purpose, including but not limited to reproduction, disclosure, transmission, publication, broadcast, licensing and posting. ATT Metrology has permission to use any such information for any type of media, including marketing that it chooses.

COPYRIGHT COMPLAINTS

ATT Metrology respects copyright laws and expects our viewers to do the same. ATT Metrology may choose to hold anyone infringing upon ATT Metrology copyrights accountable and prosecute as deemed necessary. Please contact info@attinc.com or 888-320-7011 to make a claim or if you have questions regarding a claim.

REGISTERED USERS

Those who have signed up for a username/password (‘Registered Users’) are responsible for maintaining the confidentiality of their account and user password. Registered User are fully responsible for all activity that occurs under their account with or without their knowledge. You may change your password at any time by accessing your account information. In the case of a breach of security on your account, Registered Users must immediately notify ATT Metrology. ATT Metrology will not be liable, directly or indirectly for any loss or damage arising from your failure to comply with this section. In the event that you are becoming a Registered User, you agree that you are 13 years of age or older, agree to the conditions of the Terms of Use, and have read the Privacy Policy.

CONCLUSION

ATT Metrology may at any time revise these of use by updating this posting. You are and will be bound by such revisions and should therefore periodically visit this page to review the then-current of use to which you are bound. No waiver of these of use shall be valid unless signed in writing by an authorized representative of ATT Metrology. By visiting this website, you agree that the laws of the state of Washington, without regard to principles of conflict of laws, will govern these terms of use and any dispute of any sort that might arise between you and ATT Metrology. Any claim, lawsuit, or other action relating to or arising out of the Website, its use or these terms of use only shall be brought in a court of competent jurisdiction located in King County, Washington.