Projects

Laser Tracker Training & Process Documentation Development

ATT Metrology Solutions was contracted by Raytheon to assist them in improving the implementation of their laser tracker systems by performing advanced training for their Tool Fabrication and Quality personnel. ATT also assisted in developing documentation to ensure the operators were following the best practices…Read More

AdobeStock 573814977 Editorial Use Only Large 1

Joint Strike Fighter Fixture Alignment

ATT Metrology Solutions was contracted by Pratt & Whitney to inspect a JSF Engine Test Fixture using a laser tracker. The inspection was to provide a calibration certificate for the tool for allowing test fitting of engine components from various manufacturers around the world. ATT…Read More

Mobile Launch Vehicle Alignment and Verification

ATT Metrology Solutions was contracted to perform inspections of the attach points for the mobile launch vehicles and determine the adjustments necessary to ensure that the launch canisters would properly attach to the vehicles without requiring special adjustment or rework. ATT was able to complete…Read More

P-3 Orion Reverse Engineering

ATT Metrology Solutions was contracted by the National Research Council of Canada to digitize a full scale P-3 Orion using a Leica laser tracker. The project required several days to measure all of the flight surfaces of the aircraft and resulted in over a hundred…Read More

747 Skin Panel Tool Fabrication

ATT Metrology Solutions was contracted by NG–Hawthorne to provide laser tracker and tool fabrication support to assist in the conversion or fabrication of nearly 100 tools used for the production of 747 panels. ATT’s level of support consisted of providing 14 laser tracker systems, up…Read More

AdobeStock 387959275 Editorial Use Only Large

F-16 Reverse Engineering & Fit Prediction

ATT Metrology was contracted to measure the forward and center fuselage mate areas on an F-16 Fighter Jet prior to joining the aircraft in the factory. ATT used the laser tracker data to develop NURBS surfaces using a reverse engineering software package. This same package…Read More

X-33 Reusable Launch Vehicle Mock-up Fabrication Support

ATT Metrology Solutions was contracted by Lockheed Martin – Skunkworks Division, to provide multiple Leica laser tracker and computer aided theodolite systems to support the fabrication of X-33 Reusable Launch Vehicle (RLV) Mock-Up tooling and parts. ATT was commended by the customer for fast delivery,…Read More

Target Chamber Alignment

ATT Metrology Solutions was contracted by PDM to align all the critical components for the NIF Target Chamber for Lawrence Livermore National Laboratory. The project represents the largest laser fusion project in the world, at a cost of nearly $1.5 Billion. ATT assisted PDM by…Read More

National Ignition Facility

ATT Metrology Solutions was contracted by LLNL to assist the LLNL Precision Survey Group with laser tracker and total station measurements on the NIF Project. ATT technicians assist with valuing and monitoring control networks in the NIF Laser Bays, Switchyards and Target Bay. ATT is…Read More

High Speed Test Track Rail Alignment

GET A QUOTE TODAY WE MEASURE SUCCESS BY THE EFFECTIVENESS OF YOUR RESULTS Design Experience – Fusion Power Infrastructure ATT Metrology Solutions was contracted in 1998 by Holloman Air Force Base to align the rocket test rail using a laser tracker. The measurements were conducted…Read More

AdobeStock 468021218 Editorial Use Only Large

Tooling and Experimental Manufacturing

ATT Metrology was contracted to supply Leica LTD500 laser trackers, training and consulting for the support of the tooling programs for CRJ200, CRJ700 and the upcoming CRJ900 programs. ATT was successful in assisting Bombardier in becoming a leader in the implementation of laser trackers for…Read More

Large Aircraft Infrared Counter Measure – (LAIRCM)

ATT Metrology was contracted by Boeing to measure the LAIRCM Sensor and SLTA locations on 40+ C-17 Aircraft. The task required the utilization of a combination of both Laser Tracker and Digital Photogrammetry to achieve the highest accuracy. ATT developed techniques which allowed the measurement…Read More

C-17 Wing Major Tool Fabrication

ATT Metrology, under contract from EBCO and JEDAV, fabricated major C-17 Wing Tools using computer aided theodolites to locate all critical details. The tools were completed in unprecedented time using advanced techniques of gageless tool fabrication with the CAT systems. These techniques developed by ATT…Read More

Calibration of Laser Projection System For Composite Ply Layout

ATT Metrology Solutions was contracted by Bell Helicopter to assist in the installation, alignment and calibration of a state-of-the-art laser projection system. The laser system projects the outline of various composite pieces onto the main composite part or mold for accurate positioning of the plys.…Read More

F-16 Boresight Alignment Systems

ATT Metrology Solutions was selected by Lockheed Martin to develop and implement a modernized system for the alignment (Boresight) of key system components on the latest F-16 Fighter series. The LTAS replaces the original opto-mechanical methods, which are relatively unchanged from those used in World…Read More

AdobeStock 389888907 Editorial Use Only Large

747 Large Cargo Freighter (LCF) Dreamlifter

ATT Metrology Solutions (ATT) was contracted by Boeing to provide laser tracker and tooling support to assist in the conversion of 747 passenger aircraft into the LCF. ATT’s level of support consisted of providing laser tracker systems and personnel to support locating critical parts and…Read More

AdobeStock 501231272 Editorial Use Only Large

P3 Orion Symmetry Validation

ATT Metrology Solutions (ATT) was selected by Alabama Aircraft Industries Inc. (AAII) to provide precision measurement services to validate airframe symmetry for P3 Orion airplanes during the wing panel and spar replacement process. ATT was assigned the task to level the plane and then perform…Read More

AdobeStock 573814977 Editorial Use Only Large

F-135 GFE Hardware (Engine and Lift Fan)

ATT Metrology Solutions (ATT) was selected by Pratt & Whitney to provide precision measurement services to measure and evaluate critical features using a Leica Laser Tracker fitted with T-Probe measurement capability and using Spatial Analyzer software. ATT was brought in to provide objective assessment of…Read More